Trip hazards Dallas, East Texas
What does ADA have to say about trip hazards?
ADA compliance:
303.2 Vertical. Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
303.3 Beveled. Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
ADA places a direct responsibility upon property owner.
303.2 Vertical. Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
303.3 Beveled. Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
ADA places a direct responsibility upon property owner.
1.OSHA does not regulate height differences in sidewalks and walkways
2.ADA guidelines state that the maximum height difference in egress is ¼”. A bevel with a slope length that is twice the height difference may be used if the height difference is between ¼” and ½”.
3.The vertical height difference in walking surfaces may also be regulated by state or local building codes.
2.ADA guidelines state that the maximum height difference in egress is ¼”. A bevel with a slope length that is twice the height difference may be used if the height difference is between ¼” and ½”.
3.The vertical height difference in walking surfaces may also be regulated by state or local building codes.
COMMERCIAL APPLICATIONS
SLAB STABILIZATION
BENDING CONCRETE IN LINDALE
